Remote control / measuring via Ethernet and GSM

GSM alarm controller - sends alarm SMS and calls
8 x digital inputs
Must be programmed with USB cable to PC
Microphone in, line out (listening in and conversation)
Battery back-up
Antenna with SMA male included
4G mobile network

Vandal-proof GSM dome antenna for metal roof mounting
850-960 / 1770 - 2100 MHz
with 1.5 meter RG 174 Cable
SMA male (rounder + tap)
ABS plastic - With rubber gaskets
Thread hole Ø12 mm

Rest sale

Air conditioning management via mobile phone
Send SMS that simulates IR remote control
Fits for most air-conditioning devices
login to our website and download the manual
manual denotes Models It Supports

Web-based remote control of switching on/off via the Internet
Built-in Web Server. Username + Password
MQTT, Cloud, SNMP
APP for Smartphone
Watchdog with ping of stable website (Google etc.)
4 x 230 VAC sockets - IEC C-13 output 10A and C-14 input 15A.
Web server built-in - password-protected.
VPN Client
Supports: HTTP, HTTPS/SSL, TCP/IP, PPPOE, DHCP, DDNS, SNMP v3, SMTP, NTP, TLS
Supports: Cloud Connect : AWS IOT, GOOGLE Cloud IoT, Microsoft AZURE IOT
Dimensions: 195 x 116 x 45 mm
Rack fittings are purchased separately

Track - 20 x 230 V outlet, built-in power consumption meter.
Can be cascaded with nine slaves.
Ethernet password. logo Email alert for exceeding limits and the errors

1-pole relay output - switcher L

Device to turn on/off via the Internet.
With Wi-Fi
4 x 230 VAC sockets - IEC C-13
1 x C-14 input.
Web server built-in
Password protected.

On / off via SMS messages
plugged in socket to GSM 2G network
Setup with phone number
Connects to 230vac
Maximum 10 amp
with Schuko connector
SIM card not included

Power distribution device for on and off of 8 x 230vac
monitoring of total power consumption, temperature.
with slave devices Connected: Up to 128 outlets.

Network-based device for switching on/off 230 VAC equipment.
Web server built-in - password-protected
Can ping a stable IP address and if there is no response - switch equipment off and on
Timetable for switch on and off - scheduler
Additional mains cable: K-PWR-SHUKO180

Network operated relay box for switching on/off 230 VAC equipment
Shows current power consumption and ambient temperature on PC.
Web server built-in - password-protected.
With IP ping to stable website, it checks network outage.
If there is no response, it turns OFF/ON the desired external equipment.
ON/OFF can be controlled remotely from the browser.
Scheduled ON/OFF
HTTP, TCP/IP, DHCP, DDNS, SNMP v1, SMTP, NTP

Relay box for switching on/off 2 x 230 VAC equipment via the network
Shows current power consumption and ambient temperature on PC.
Web server built-in - password-protected.
Time schedule - time table for switching on/off
Time table for on/off. 2 x 230VAC outputs

Temperatursensor til temperaturmåler med 2 meter kabel

GSM 12dBi panel antenne med 1,8 m kabel mål 23 x 9 cm

Vandal secure GSM dome dome antenna for hollow mounting
Quad band - 850/900/1800/1900 / 2170MHz
With 2.5 meters RG 174U cable - SMA he
ABS plastic - with rubber seal Ø47 x 15mm, M10 thread, 12mm
bandwidth ± 90/280 MHz
Gain 2,5dBi
vertical
Max wind speed 200km/h

3,6 V/1200 mAh batteri til ca. 60 timers drift ved fuld opladet

Temperature gauge
1.8 Meter cable
Dallas DS18B20 Chip

GSM I / O Box. Compact access control with up to 999 users
Specified time range for access
3G / 4G 850/900/1800/1800/1900 MHz
2 digital contact inputs
1 Relay output 230vac Max. 3A
Supply voltage: 9 -15VDC
Goal: 88 x 70 x 30 mm
Operating temperature: -20 - + 60 ° C
Antenna included
App for Android and iOS

Thermal sensor for mounting
Dallas DS18B20 Chip
5 Meters

Temperature sensor for mounting
10 m wire
Dallas DS18B20 Chip
With copper bracket for vertical mounting (M6, 6mm diameter mounting hole)
Measuring range: -10 to + 85 ° C Accuracy on +/- 1 ° C

Thermal sensor for mounting 3 meters
Sensor tip: stainless steel
Medium 3.0V - 5.5V supply
With new chip for each pin
BLUE pin: DATA
BLACK pin: GND
RED pin: VCC
1-wire (multiple to same pin)

Tilbehør til GSM-IO-T

Ekstra tilbehør til GSM-IO-T

Energy meter Per outlet in KWh.
Cannot turn on / off exits !!
8 x 230vac IEC C13 Outlet with energy measurement in kWh per removal.
Web interface

Remote-controlled 230VAC power rail with on/off per output
1U 19" for rack mounting - rack bracket included
8 x 240VAC C-13 outlets
1 x C20 input plug. C-19 plug not included
Switch on / off Server via the network / Internet
User interface is via Web browser
Wi-Fi connection
Password protected
Supports iPhone and Android

Inkl. 4 stk. temperaturføler + GPS modul

Clearance

Ethernet I/O med 12/6 isolerede I/O kanaler.
Med tæller og Integreret WEB-server med nem Javaprogrammering.
12 kanalers DI, 2 kanalers DO, 2 kanalers tæller - Ethernet-based smart I/O
Fjernmonitorering og -styring
Supporterer Modbus, TCP/IP, UDP, HTTP, DHCP
Web-Server: XML, HTML 5, Java Script

Thermal sensor for mounting incl. 10 m wire

Control via SMS messages
Alarm at power failure
Relay output for 230VAC
Universal input for temperature sensor

Temperature sensor with 5 meter cable

measuring range -55 ° C To + 125 ° C

Fits GSM-IO-PWR

Measure 45 x 5 mm

Temperature range -40 to 120 ° C

Moisture range 0 to 99% Target 70 x 5 mm

Fits GSM-IO-PWR

Netværksbaseret enhed til tænd/sluk af 230 VAC udstyr. 
Web-server indbygget - password-beskyttet
Kan pinge en stabil IP-adresse (f.eks. Google) og ved manglende svar - slukke og tænde udstyr 

Open board til smart temperatur- eller fugt måling and styring
Password beskyttet Web baseret konfiguration og kontrol
1 x digital input med “dry contact” og “logic level” mode
1 x analog input fra 0 til 60VDC
1 relæ output med NO/NC kontakter
1-Wire input til 1 temperature eller fugtmåler
SNMP v.1 support
SNMP traps ved alarm
E-mail udsendelse ved alarm
SMTP med godkendelse (SSL/TLS er ikke supporteret)
HTTP og XML API kommandoer
Remote FTP firmware update.

1-wire communications - several sensors can be connected to the same unit
± 3.0% relative humidity accuracy
± 0.4% relative temperature accuracy
12 bit resolution for humidity measurement
14 bit resolution for temperature measurement
Calibrated digital output
Eksellent long-term stability
Each sensor has its own unique 64-bit serial number

Mini vertical level switch / swim switch
Assembly: Vertical
contact output: Direct load
Cable length: 30 cm
Operating temperature: -20 ° C to + 80 ° C
AC voltage Max: 130V < Br> DC voltage Max: 180V
Max current: 700mA

Remote control of the DC voltage
2 x LAN and 1 x WAN port - network switch
Power supplied from 12VDC - supplied
Output voltage 5VDC or 12VDC / 2Amp
2 x DC cables with Jack 5.5 / 2.5mm and 3.1 / 1.3mm of 1.0m
2 x CAT5E UTP network cable of 1.0m

8 Port Networked PDU with Individual On / Off
19 "Rack Mount, 1U
User Interface via Web Browser with Password
Scheduled on / off per port
Programmable Sequential Power Up
8 x IEC C13 outputs, max. 10A - front mounted plug
2 x inputs for temperature and temperature / humidity sensor with alarm
8 x Watchdog with ping of each connected PC
SNMP Get / traps and e- mail support
Supports Iphone and Android

4 ports PDU with individual power on / off and total current meter via network
1 x Alternative Type E connector (CEE 7/3) max 16A
User interface via web browser with Password
Programmable sequential power up 4 x Schuko outputs type F, max. 16A
4 x Watchdog with ping of & nbsp; each connected PC
SNMP Get / Traps and Email Support
Supporting Iphone and Android

12 port PDU with individual on / off and assembled power meter via network
19 "rack mount, 1U
2 x power supply with 230V, 16A
User interface via web browser with Password
Scheduled on / drain per port
Programmable sequential power up
12 x IEC C13 outputs, max. 10A
2 x inputs for temperature and temperature / humidity sensor with alarm
12 x Watchdog with ping for each connected PC
SNMP Get / Traps and Email Support
Supports Iphone and Android

12 ports PDU with individual on / off and individual and overall power meter via network
19 "1U rack mount
Integrated power measurement and monitoring per power outlet
User interface via web browser with Password
Scheduled on / off per port
Programmable sequential power up
8 x Schuko outputs, max. 10A
2 x inputs for temperature and temperature / humidity sensor with alarm
8 x Watchdog with ping off & nbsp; each connected PC
SNMP Get / Traps and Email Support
Supports Iphone and Android

12 ports PDU with individual on / off with individual and overall power meter via network
19 "1U rack mount
Integrated power measurement and monitoring per output
User interface via web browser with Password
Scheduled on / off per port
Programmable sequential power up
8 x IEC C13 outputs, max. 10A
2 x inputs for temperature and temperature / humidity sensor with alarm
8 x Watchdog with ping off Every Connected PC
SNMP Get / Traps and Email Support
Supports Iphone and Android

7 ports PDU with overall power meter through network
One power meter can be reset, the other accumulates consumption.
User interface via web browser with Password
7 x IEC C7 outputs, max. 16A (safety socket)
1 x RJ45 to LAN and 1 x RJ45 for remote sensor (temperature, humidity, hPascal
SNMP Get / traps and email support

7 ports PDU with overall power meter via network
can measure residual current measurement
One power meter can be reset, the other accumulates consumption.
User interface via web browser with Password
7 x IEC C13 outputs, max. 16A (safety socket)
1 x RJ45 to LAN and 1 x RJ45 for external sensor, temperature, moisture, hPascal
SNMP Get / traps and e-mail support

20 ports PDU with individual and total power meters via network
User interface via web browser with Password
16 x IEC C13 outputs 10A & nbsp;
1 x RJ45 to LAN and 1 x RJ45 for sensor, temperature, moisture, hPascal
4 x Schuko outputs 16A
SNMP Get / traps and email support

20 ports PDU with individual and total power meters via network
Integrated residual current measurement type A
User interface via web browser with Password
16 x IEC C13 outputs 10A
1 x RJ45 to LAN and 1 x RJ45 for sensor, temperature, moisture, hPascal
4 x Schuko outputs 16A
SNMP Get / traps and email support

4 ports PDU med samlet strømmåler via netværk
Med reststrømsmåling type A.
19" rackmontering, 1U
Måling af energi og elektriske dimensioner
Integreret Hotswap skuffe til udskiftning af processor/strømforsyning under drift
Måling af 2 resp. 4 separate faser
4 x IEC C13 udgange 14A 
3 x RJ45, LAN og Sensor
4 x IEC C20 Strømforsyning 16A
SNMP Get/traps 

4 ports PDU med samlet strømmåler via netværk
Med reststrømsmåling type A.
19" rackmontering, 1U
Måling af energi og elektriske dimensioner
Integreret Hotswap skuffe til udskiftning af processor/strømforsyning under drift
Måling af 2 resp. 4 separate faser
4 x IEC C13 udgange 14A 
3 x RJ45, LAN og Sensor
4 x IEC C20 Strømforsyning 16A
SNMP Get/traps 

Bypass-Switch til udskiftning eller vedligeholdelse af uafbrydelige strømforsyninger (UPS)
19" rackmontering, 1U
Synlig LED-Display
1 output „zur USV“ IEC C13, 10A / IEC C19, 16A
1 input „von USV“ IEC C14, 10A / IEC C20, 16A
4 x IEC C13 udgange 14A 
3 x RJ45, LAN og Sensor
1 x IEC C14 10A/ IEC C20 16A Strømforsyning

Bypass-Switch til udskiftning eller vedligeholdelse af uafbrydelige strømforsyninger (UPS)
19" rackmontering, 1U
Synlig LED-Display
1 output „zur USV“ IEC C19, 16A 
1 input „von USV“ IEC C20, 16A 
6 x IEC C13 udgange 10A 
1 x IEC C20 16A  Strømforsyning
Lavt internt strømforbrug

automatisk transfer switch (ATS) til skifte til en alternativ strømforsyning
Typisk overførselstid 7 - 10 ms.
Brugerflade via web-browser med Password
Programmerbar sekventiel power up
6 x IEC C13 udgange 10A 
1 x IEC C19 16A
3 x RJ45, LAN og Sensor
2 x IEC C20 16A strømforsyning
SNMP Get/traps og e-mail support

1 shift relay output (NO / NC), relay contact: 24V / 0.5A
1x on / off output, (PTR multiconnector)
Power supply 12VDC / 500mA included
1 x RJ45 Ethernet
APP for Android & amp; iPhone
SNMP Get / Traps (SNMPv1, SNMPv2c)
Syslog and Email support

The ideal choice for Server Room and Server rack monitoring.
4 x potential-free switching relay outputs - 36VDC / 3A switches
Large LED display for power measurement, IP address, sensor data and error reports
4 x Watchdog for monitoring connected PCs (ICMP / TCP)
12 x passive signal inputs - (contact inputs) for Phoenix plugs
4 x RJ45 for temperature / humidity sensors. RS232 / 485, 1 x RJ45 for LAN
Features, limit values, alarm receivers set up on the device via supplied software
2 x 12VDC power supply inputs (redundant)
PoE - Power over Ethernet for 2111-2 the model.
Free APP for Android and iPhone
SNMP Get / Traps (SNMPv1, v2c, v3)

4 x potential-free shutter release, & 230VAC / 16 A, & 24VDC / 10 A
8 x passive signal inputs - contact inputs
1 x RJ45 Ethernet
4 x Watchdog to monitor connected devices (ICMP / TCP)
1 Mini-DIN connector for optional sensor or serial interface (RS232)
Programmable on / off sequence
SNMP Get / Traps (SNMPv1, SNMPv2c), Syslog, e -mail
APP for Android and iPhone
2-color LEDs for status info on front
DIN rail mounting

3 x tænd/sluk, potentialfri relæ ouputs, 230 V AC, 16 A / 24 V DC, 10 A
1 x strømforsyning med 12-24 V AC / DC spænding
1 x RJ45 Ethernet
3 x Watvhdog til at overvåge forbrugere (ICMP / TCP)
1 Mini-DIN-stik til valgfri sensor eller seriel interface (RS232)
Programmerbar tænd / sluk-sekvens
SNMP Get/Traps (SNMPv1, SNMPv2c)
Understøtter Android og iPhone
Syslog og E-mail
DIN-rail montering i servere racks

Antenna for GPS, 2.4GHz WIFI, 4G, LTE
5MHz bandwidth
Screw mounting
4 meter cable
Temperature: -40 - +85℃
Full IP67 Waterproof

ARM Cortex - A53 CPU , 1.2 GHz
RAM 1Gb SDRAM
16GB of memory
2 x RS232/422/485
8 x DI and 4 x relay outputs
DC input 9-32V
4G module
OS : Linux Raspbian
User need knowledge of linux and programing
Documentation for DI/O and 4G module

Built-in Web Server
Web HMI
Support for MQTT Protocol
2-port Ethernet Switch for Daisy-Chain Topology
Dual Watchdog
Operating Temperature -25 to +75°C
DI: 8 Channels
DO: 8 Channels

1 channel detection of fluid leakage with MODBUS
Shutter local alarm of detection of water leakage
Acoustic alarm - adjustable
RS485 2-wire MODBUS RTU
2 x LED indicators for power and alarm
Relay output for alarm for water leakage - 30VDC / 2A
Monitor cable for liquid detector
Sensor cable can be up to 500 meters
Sensitivity is adjustable
Supports DCON and Modbus RTU protocols
Embedded Dual Watchdog
Operating temperature: -25 to + 75 ° C
Small form factor with DIN bracket
Dimensions: 83 x 70 x 29 mm
Operating voltage: 10 - 30VDC

Industrial / outdoor robust environment-measuring station
Partikkelstørrelser down from 0.3μm to 10 μm 
CO2 0-9999 ppm - electrochemical sensor
temperature of -20 - +50°C
Humidity of 0 - 100% RH
Dewpoint measurement based on the temperature and moisture
Up to 180,000 logs with date and time stamps
Web-based configuration interface
Effective software: iOS APP and Android APP (free)
DCON, Modbus RTU / TCP and MQTT protocols
RS-485 / Ethernet / PoE
Relay output for local alarm or building management
Power supply: PoE and 12 - 48VDC ca. 3.5Watt
IP43 sealed enclosure (CO2 + temperature sensor)
Dimensions: 211 x 130 x 70 mm
DIN or wall mounting bracket

The indoor light-gauge, temperature and humidity sensor 3 in 1
For energy optimization and building automation systems
Measuring range of illumination: 0 to 20,000 lux
Temperature Range: -20 to + 60 ° C
humidity Measuring range: 0 to 100% RH
Supports DCON and Modbus RTU / TCP protocols
Supports MQTT protocol Ethernet interface
With RS485 / RJ45 Ethernet communications interface
Relay output - 6 Amp @ 250VAC
Power supply: PoE and 10 - 48VDC, ca. 2 Watt
Operating temperature: 0 - + 75 ° C
web configuration and firmware update via Ethernet
Ceiling Mounting

CO2 - CO - temperature - humidity
Industrial / outdoor robust environment-measuring station
LCD color display
CO2 0-9999 ppm - electrochemical sensor
temperature of -20 - + 50 ° C, humidity 0 to 100% RH
dewpoint measurement based on the temperature and moisture
Up to 450,000 logs with date and time stamps
Web-based configuration interface
APP: iOS APP and Android APP, powerful software
DCON, Modbus RTU / TCP and MQTT protocols
RS-485 / Ethernet / PoE
Relay output for local alarm or building management
power supply: PoE and 12 - 48VDC ca. 3.5Watt
IP43 sealed enclosure (CO2 + temperature sensor)
Dimensions: 211 x 130 x 70 mm
DIN or wall mounting bracket

Web-based temperature and moisture data loggs
1-wire bus for a maximum of 16 sensors (Temp / Moisture)
Permissions: Administrator, Manager, User
Tasks
50 Scheduled
50 Conditional
20 Override Schemes
Email Alarms, Custom (Encrypted Email Servers, such as Gmail)
Real Time Clock With NTP Server Synchronization
No Software Required
Basic Script Support for Advanced Flexibility
Configurable logging
Graph (logged data)
HTTPS / TLS encrypted
static or DHCP IP address configuration
Modbus, SNMP, Remote Service, IP filtration
On-site updates
Robust cabinet for DIN rail / wall
Supply voltage: POE or 9 - 28VDC, 134mA

Rain sensor for weather station and alarms
Pulse signal When tilt container is filled with water
Making short contact between the 2 wires
Cable length: 2.8 meters
Dimensions: 150 x 60.5 x 92 mm (L x B x H)
distance between mounting holes: 135 mm

Multi-band 4G LTE Cat.1 controller, logger and alarm
Setup via USB, SMS and HTTP API
USB setup - use USB cable with Mini B male
2 digital "dry contacts". High on contact
2 analog inputs, 0 - 10VDC or 4-20mA input (10bit)
4 relay outputs, COM, NO and NC
1-Wire input for up to 8 Teracom sensors
1 x RS485 for max. 8 MODBUS RTU sensors
Data logger with 70,000 logs
Upload data to HTTP/HTTPS Post in XML/JSON
SMS alarm and Email alarm to 5 recipients
Push mode – XML data is sent via HTTP Post to a remote server. Responses from server may contain relay setup.
10 to 28VDC, 370mA @ 12VDC - additional PSU
Dimensions: 158 x 119 x 34 mm
Weight: 470g
Temperature: -20 - +55°C

Intelligent 8 ports Power Distribution Unit
Justerbar sekventiel tænd / sluk
Samlet strømovervågning
Samlet spændingsindgang
Outputovervågning
Total brugt kWh
Effektfaktorgenkendelse
Driftstemperatur: Op til +55°C
8 x låsbar IEC-C13 netudtag
120 - 240VAC
Styr op til 3 PDU slaver fra en master
1 x C20 16Amp
Sensor for temperatur- og fugtighedsalarm
Alarm for vand via infrarød sensor
Røgdetektor
Automatiske alarmmeddelelser

GSM/3G/4G LTE
2 x digital input, compatible dry contact and wet contact, supports EOL connection;
2 x relay outputs (240VAC@3A)
One relay output can be switched on/off by sending an SMS text
The second relay output can be switched on for 4 minutes if inputs are activated
Supports input status recovery, external power failure alarm via SMS texts
Must be programmed with USB cable to PC
9~36VDC supply voltage and power source output for external device
Up to 3 users can receive alarm and daily report SMS
Up to 5 users can receive alarm calls;
Free SMS APP
Rechargeable backup battery and power monitoring alarm
Metal housing, IP30
Operating temperature: -10 - +70°C
Dimensions: 70 x 88 x 30 mm
Wall installation and DIN
Whip antenna with magnetic base 3m cable included

GSM / LTE alarm - 4G
Configuration via USB (Windows program) or SMS
2 x digital inputs with "dry contact" or "logic level" mode
2 x analog input from 0 to 60VDC, 10 bits
2 x relay output with NO / NC switches
1-Wire interface for 4 Teracom temperature and humidity sensors
Input can be navigated with alarm text etc.
SMS alarm - up to 5 numbers
Email alarm - up to 5 email recipients, SMTP with TLS support
1 relay can be activated with calls from up to 100 telephone numbers
Push mode - XML data is sent via HTTP Post to a remote server. Server response may include relay setup.
MQTT 3.1.1 support
Firmware update "on air"
Supply voltage: 8 - 32VDC, 2Watt - additional PSU
Dimensions: 109 x 65 x 32 mm
Weight: 152g

2 x 230VAC power relay /16A – resistive load.
2 x DC switched outputs up to 40VDC/6A, also as PWM for LED, FAN, etc.
2 x independent inputs: 230VAC and up to 24VAC/24VDC, SMS alerts for power failure
SIM card and SD card
Backup battery (not included) as an option – Li-Ion 3.7V (14500)
Switch appliances on and off with SMS messages
GPRS M2M function, TCP/IP Get to directly send input status to Server
Get XML status from server to set device outputs.
Scheduled automatic switching on and off of appliances
Sends power failure warning and recovery.
Restarting appliances, such as servers.
Monitoring of 2 x A/D inputs AC/DC voltages with autodetect
4 x digital inputs DIN1, DIN2, DIN3, DIN4 for DC voltage.
Universal bus (1-wire) for temperature and humidity sensors.
Thermostat function.
Alarm function: Temperature alarm, Humidity alarm, A/D limits, DI change
Alarm in case of jamming of a GSM signal.
Up to 12 alarm numbers, each can be set for different events
Up to 1000 authorized users and 2 administrator numbers.
Bluetooth
All inputs are SO compatible

Vandal-proof and waterproof dome antenna
The LTE band 700-2700MHz (including GSM, 3G and 4G)
VSWR: <=1.5
Passive gain: 7-8 dBi
Polarization: Vertical
Nominal power: 50W
Input impedance: 50 Ohm
Cable length: 1.5 meters
Cable type: RG174
Connector type: SMA male
Weight of antenna: 57g
360° Omnidirectional
Center hole mounting

Event and schedule controlled switching 230VAC/10A
Accurate current measurement
Input for 2 sensors - temp/humidity, pressure
RJ45 to Ethernet
NTP function
Power port on/off via HTTP(S), SNMP, ModbusTCP, Telnet, SSH, MQTT
1-channel watchdog
Power port assigned to Watchdog (ICMP/TCP), auto reboot starts
Power consumption measurement (kwH) with 2 energy counters: one counter counts consistently, the other counter can be reset
Measurement of current (A), voltage (V), active power (W), apparent power (VA) and reactive power (VAr)
Measurement of differential current type A (mA)
Dimensions: 120 x 65 x 53 mm

CPU: 720Mhz/ 4 Core/2GB/Linux v.5.10
10/100 ethernet connection
2 x USB to USB camera, USB FLASH, USB HUb
8 x Analog ports
32 x Digital inputs
8 x Isolated digital outputs max. 24Vdc, 15mA
2 x Relay (NC NO COM) max. 10A for AC, 9~30V for DC voltage
LTE slot modem (modem purchased separately)
1 x Audio-Video output & input
SBNP v1, v2c, v3
OpenVPN, SSL, HTTPS
DHCP, HTTP, DynDNS, SMTP, RADIUS, Syslog, NTP server, HTTP request
API
Notification E-mail, phone call, SNMP, WEB to SMS, SMS Link
Logging SD, USB Flash, E-mail, FTP
power supplies single/redundant 24-48Vdc, 230Vac (contact sales regarding versions)

1-Wire temperature / humidity sensor
3 wires. +3.3 - 5.5VDC, Gnd, Data (yellow)
Temperature: -40 - + 80°C
Humidity: 0 - 99%RH
Temp: +/-0.5°C
Humidity: +/-3%RH
Repeatability: ±1%RH, ±0.2℃

Supports optional choice of ports from 8 - 12 - 16 - 20 - 24 ports.

The Current changes with the various models 16 - 32 A.

Current and voltage (total input) measurement;

Built in temperature and humidity sensor

Embedded technology, support Java, web browsing;

Two level values of warning and overload can be set;

LED indicates the power supply status of each switch;

LED digital display shows the current voltage and current values;

Provide local operation query button of PDU device;

Built in lightning protection circuit, anti voltage surge circuit, effective protection of the server;

Water detector with normally closed relay output
Supply voltage: 5VDC / 10mA
Relay contact: max. 30VDC/500mA
Red: +5VDC
Black: GND
Green: Relay contact
White: Relay contact
REMEMBER: Relay contact opens when water is removed.

CPU QuadCore Cortex A72 (ARM v8) 64 bits SoC 1.5GHz
RAM 4GB LPDDR4 standad (1/2/8 optional)
32GB EMMC Flash Memory
1x Micro HDMI
2x USB 3.0, 2x COM (1xRS-232/422/485, 1xRS-232/485)
RTC : Real Time Clock
1x Digital Input Dry(open/close)/Wet(0-3V/10-30V) contact
1x Digital Ouput (120VAC @0.5A, 240VAC @0.25A, 30VDC @1A)
DC 9~32V input DC Jack or Terminal Input

GSM/LTE alarm - 4G - Global version
Supports all LTE frequencies
Configuration via USB (Windows program) or SMS
2 x digital inputs with "dry contact" or "logic level" mode
2 x analogue input from 0 to 60VDC, 10 bits
2 x relay output with NO/NC contacts
1-Wire interface for 4 Teracom temperature and humidity sensors
Input can be navigated with alarm text etc.
SMS alarm - up to 5 numbers
Email alarm - up to 5 email recipients, SMTP with TLS support
1 relay can be activated with calls from up to 100 phone numbers
Push mode – XML data is sent via HTTP Post to a remote server. Responses from server may contain relay setup.
MQTT 3.1.1 support
Firmware update "on air"
Supply voltage: 8 - 32VDC, 2Watt - purchase PSU
Dimensions: 109 x 65 x 32 mm
Weight: 152g

Global 4G LTE Controller, logger and alarm
Supports all LTE frequencies
Setup via USB, SMS and HTTP API
USB setup - use USB cable with Mini B male
2 digital "dry contacts". High on contact
2 analog inputs, 0 - 10VDC or 4-20mA input (10bit)
4 relay outputs, COM, NO and NC
1-Wire input for up to 8 Teracom sensors
1 x RS485 for max. 8 MODBUS RTU sensors
Data logger with 70,000 logs
Upload data to HTTP/HTTPS Post in XML/JSON
SMS alarm and Email alarm to 5 recipients
Push mode – XML data is sent via HTTP Post to a remote server. Responses from server may contain relay setup.
10 to 28VDC, 370mA @ 12VDC - additional PSU
Dimensions: 158 x 119 x 34 mm
Weight: 470g
Temperature: -20 - +55°C