12VDC fan 30 x 30 x 10mm with tachoregulation
12 VDC fan with ball bearings
30 x 30 x10mm
22dBA or more
0.96W
8000 RPM max.
3pin Molex
In this category you will find our selection of fans for computers and cabinets. Here you will find both fans and protective grid for the fan. Depending on the size of the fan, we have several models to match your needs. Call into our sales department for further information.
There are 27 products.
12 VDC fan with ball bearings
30 x 30 x10mm
22dBA or more
0.96W
8000 RPM max.
3pin Molex
40 x 40 x 10mm
12 VDC fan with ball bearings
6000rpm
25dB
Without thermoregulation
UL, CUL, TUV, CE
Molex connector
Temperature gauge with 2 x 230VAC outlet for fan control
230VAC outlets are ON/OFF
Instant fan speed
suitable for regulating the temperature in rack cabinet
1U blæserindsats med 4 stk. blæsere til forbedring af luftcirkulationen i rackkabinet.
Front-afbryder til tænd og sluk af de 4 stk. blæsere
Ingen hastighedsregulering af blæserne
230 VAC Blæser til 19” rackskab
120 x 120 mm blæser, 12 VDC blæser med kuglelejer med termoregulering,
60 x 60 x 25 mm fan
12 VDC fan
0,15A / 1.8W power consumption
With ball bearings
With thermoregulation
3 pin / molex
80 x 80 x 15 mm
12 VDC fan
Ball bearings
Tachometer
0.95m³/min
34dB-A
7-13.8V
90 x 90 x 25 mm fan
built-in thermo sensor
Automatic speed control determined by temperature
12 VDC 3.12 watts
with ball bearings
3 pole with taco pulses for motherboard (yellow)
Molex 4 pole for ATX PSU 12VDC
ARCTIC F9 PWM - indsats med blæser
Cooling fan 12V 0.40A
4-wire, 4-pin
90 x 90 x 25mm
3U køler
Supply Voltage 12 Vdc
Height 40mm
DC Operation DC
Width 40mm
Depth 20mm
Power Consumption 2.04W
Maximum Current 170mA
Air Flow 21.6m³/h
Dimensions 40 x 40 x 20mm
Noise Level 33dB
Fan Speed 9000rpm
Bearing Type CeraDyna C
Black 3U fan module for 19" rack
With 3 x FAN
ON/OFF switch on the front
Blows air into the rack cabinet
Fan speed 2100-2300 rpm
Blower noise 33/35dBA
Fan dimensions 120x120x25
Max. air flow 55/63CFM
Uses AC and 0.08 A
For 230VAC - mains cable (IEC) included
Replaceable filter.
Filter is inserted
Steel house
Black 3U fan module for 19" rack
With 3 x FAN
ON/OFF switch on the front
Sucks air out of the rack cabinet
For 230VAC - mains cable (IEC) included
Exchangeable filter on the back of the module.
Filter is inserted
Steel house
3 pin to 2 pin adapter with CB-32C connector
Connect 2 pin connections to standard 3 pin fan adapter.
Connect 2 pin connections to standard 3 pin fan adapter.
Tråd-gitter til 40 x 40mm blæser
Wire grid for 70 x 70mm fan
Tråd-gitter til 90 x 90mm blæser
Tråd-gitter til 120 x 120mm blæser
120 x 120 x 25mm.
Tachometer
Ball bearings
3-Pin
12VDC 4.8W
153m³/h
70m³/h, 35dBA, 1.7W
80x80x25 mm.
without thermoregulation
ball bearings
Fan
12 VDC
DELIVERED WITHOUT GRILL!
Wire grid for 80 x 80mm fan
Cooling fan for 5VDC 0.25A
40 x 40 x 10 mm
3-pin cable
5000 rpm
300 Watt PTC heating element for Temperature control
Has a built-in temperature limiter.
With fan - 45m3/hour
Supply voltage 230VAC
Screw terminals
Ambient temperature: -45 - +70°C
Dimensions: 225 x 110 x 80 mm
DIN bracket
PTC Heater element with passive air flow
PTC resistor - temperature limiting
Extruded aluminum
DIN-mount bracket
110 - 240VAC - 75Watt - L, N, Gnd
Continous operation
Heating power adjust to ambient temperature
Flame retardant material
3 clamp connection
IP20