Batteri til BARCCD-RF-USB

Magnetic card reader - HID. Keyboard emulation
Magnetic card reader for PS2
Can be connected via USB with adapter
USB adapter may require a restart of the PC!
PS/2 to USB adapter included
A reader head / tone head
Black
Works with OS up to and including Win 10
Can read Æ, Ø, Å. oh, oh, oh
Suitable for clinics for reading health cards
Dimensions: L 137 x H 50 XB 49 mm

NOTE: Contract with Danbit A / S and User Agreement with service supplier MUST be established before purchase!

Payment system with touch display.
accept contactless, chip, magnetic stripe and mobilepay.
GSM antenna connector MMCX to 6 digital outputs. Can be programmed with the time difference when paying. To 6 deaktiveringsindgang2. Can be configured to disable the machine
can be connected to a vending machine, washing machine, door, etc.
Web-based control panel.
Communications Internet or WiFi or 4G
Support for setup can be purchased.
Supplied with SIM card (4G)
Supply voltage: 10 - 24VDC, 10 - 42VAC / 2Amp (power supply included)

Universal electric car charging stand for all EV vehicles
Allow two electric cars to charge at the same time
Smart design
Dynamic management of charging
Interface protocol: OCPP 1.6
Payment for parking and charging by payment card
Monthly fees apply
AC Input 230-400 VAC +/- 10 (2 or 3 phase)
Total Power output 2 x 22kW / 2 x 32A Max (load sharing)
Payment: Payment card, Google Pay, Apple Pay (option: MobilePay)
Communication: 4G
IP degree: IP55
Operating temperature: -25 C° to 55 C°
Dimensions: 520 x 360 x 260 mm
Charger cable not included. The user uses the cable that comes with their car.

Keyboard emulation: 8 digits, 32bit ASCII, Decimal
Frequency: 13.56MHz Mifare Ultra Light
Versions: Mifare S50, S70, ISO15693, ISO14443A/B
Power supply: 5VDC from USB port
Operating temperature: -10 - +75°C
Reading distance: 5 ~ 15 cm
Cable: Mount the USB cable on the back
Dimension: 118 (L) x 75 (W) x 17 (H) mm
Weight: 250g ± 10%
Waterproof IP67, wall mounting

Mifare reads with USB
13.56MHz
USB HID (plug and play)
Powered from USB
Additional purchases from Decimal to HEX, normal or reverse
Additions with start and or stop character
Supports: ISO14443A, ISO18092 FeLiCa tags
Dimensions: 100 x 65 x 23 mm
Material: ABS
REMEMBER: Order the desired version - additional purchase

RFID Copy Reader / Writes to T5577 RW Tag
interface: USB
Work voltage: 5 VDC
Work current: 200mA
Standby Stream: 50mA
Normal current: 100mA
125kHz, 13,56MHz Mifare / NFC
Compatible with CCID and PC / SC
IC / ID Dual Frequency Replication
Supporter ID125K, 8800, 5200, 4305, 5577, 8265 Card
Support UID, Fuid, Cuid, UFUID
IC Semi-Encrypted Card, IC Full Encryption Card
Dim: 108 (L) x 68 (W) x 12 mm (H)

Keyboard emulation: 10 digits, 40bit Hexadecimal
Frequency: 13,56MHz Mifare Ultralight
Versions: Mifare S50, S70, ISO15693, ISO14443A / B
Power supply: 5VDC from USB port
Operating temperature : -10 - + 75 ° C
reading range: 5 ~ 15 cm
cable: Fixed USB cable on the far side
Dimension: 118 (L) × 75 (W) x 17 (H) mm
Weight: 250g ± 10%
Waterproof - IP67

Keyboard emulation: 8 digits, 32bit Decimal
Frequency: 125kHz EM4xxx
Power supply: 5VDC from USB port
Operating temperature : -10 - + 75 ° C
reading range: 5 ~ 15 cm
cable: Fixed USB cable from bottum - epoxy filled
Dimension: 118 (L) × 75 (W) x 17 (H) mm
Weight: 250g ± 10%
Waterproof - IP67