4 port PCIe RS422 / 485 card, w / DB9 splitter cable, Low and High, Isolated
4 ports RS422 / 485 PCIe card
PCIe x1, 250Mbytes / sec
Supports RS485 Auto Transceiver
128-byte FIFO
4 x DB9 male connector over octopus cable
Support 4 Thread RS422 / 485 and 2-wire RS485
Supports RS422 / 485 Speed Up to 921.6Kpbs
± 15KV ESD Protection
2KV Insulation
OS Support XP / Vista / 7/8/10 (32) / 64 bit), Linux 2.6.x / 3.x
2,053.97 NOK
Excl. VAT
Quantity
This product is no longer available for sale.
Product number RS485-4PCIE-HL-I
Specifications
| Høj/lav bagplade | Ja |
|---|---|
| Isolation | ± 15KV ESD, 2KV isolationsbeskyttelse til alt signal og strøm |
| OS SUPPORT | XP / Vista / 7/8 / 10 (32/64 bit), Linux 2.6.x / 3.x |
| PCI | 1.1, x1 |
| Porte | 4 x DB9-han-stik over blækspruttekabel |
With the PCI Express Plug and Play feature and drivers, simply follow the instructions in the Setup wizard. The system recognizes the device and installs drivers automatically. Fully compatible with x1 PCI Express Base Specifications 1.1
Andre produkter i samme kategori:
USB 3.1 Gen 1 PCI Express X1 expansion card, 2 x USB-A, 19 pin Front USB, 5 Gb/s
USB 3.0 / USB 3.1 Gen 1 / USB 3.2 Gen 1x1 - 5Gbit/s
2 x USB-A female
1 x 19-pin Front USB 3.0
Interface: PCI-e x1
High and Low Back Plate
Power supply via PCI-e slot
Color : RED
OS SUPPORT: WinXP / Vista / Win7 / Win8 / Win10 (32 / 64-bit) / Mac 10.8
276.19 NOK
Item Number: USB3PCIE3
8-port RS-232/422/485 PCI Express serial board
PCI Express 1.0 compliant
921.6 kbps maximum baudrate for fast data transmission
128-byte FIFO and on-chip H/W, S/W flow control
Variety of connection cables and boxes available for RS-232/422/485
Low-profile form factor fits small-sized PCs
Drivers provided for a broad selection of operating systems, including Windows, Linux, and UNIX
Easy maintenance with built-in LEDs and management software
RS-232 :TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 : Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w : Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Data+, Data-, GND
7,836.50 NOK
Item Number: SER8PCIE+
PCI Express card for USB 3.1C. PCIE card with USB3.1C
PCI Express Base Specification Revision 3.0 single lane (x1).
Compliant with the Universal Serial Bus 3.1 specification Gen2.
Compliant with xHCI (eXtensible Host Controller Interface) specifications Revision 1.1
Supports simultaneous operation of multiple USB 3.1, 3.0, USB 2.0 and USB 1.1 devices
Supports USB data transfer rate of 10G/5G/480/12/1.5Mbps.
Expands a single external USB 3.1 Super Speed plus Type-C port (DFP) on the system.
The USB port provides a maximum of +5V DC / 3000mA power output to USB device.
Built-in overcurrent protection on each USB port.
Supports the device's remote wake-up function from USB keyboard or mouse.
The hot swapping feature allows you to connect/disconnect a device without turning off the system.
Driver support for Microsoft Windows 7, 8.x and 10 operating systems
Certified with electromagnetic compatibility CE, FCC, VCCI, C Tick, BSMI and RoHS approval.
Windows 11 64bit
Windows 10 32/64 bit
Windows 8.1 32/64 bit
Windows 8.0 32/64 bit
Windows Server 2022 64bit
Windows Server 2019 64bit
Windows Server 2016 64bit
Windows Server 2012 R2 64-bit
Windows Server 2012 64bit
385.71 NOK
Item Number: CNV-PCIE-USB3.1C
Previous
Next







