Multi-function Data Acquisition Card

12-bit A/D resolution
Up to 100 kS/s sampling rate
16-CH single-ended or 8-CH differential inputs
Bipolar or unipolar analog input ranges
Programmable gains, x0.5, x1, x5, x10, x50, x100, x500 (ACL-8112HG),
Automatic analog input scanning
DMA for analog inputs
2-CH 12-bit multiplying analog outputs

100KHz 16Ch Analog Input A/D Card - High Gain.
16 Single-Ended or 8 Differential Analog Input Channels
Bipolar or Unipolar Input Signals
Programmable High-Gain x0.5, x1, x5, x10, x50, x100, x500, x1000
12-Bit Successive Approximation A/D Converter (AD774 or equivalent)
On Chip Sample & Hold
Two 12-Bit Analog Output Channels
16 Digital Inputs and 16 Digital Outputs
Integral DC-to-DC Converter for Stable Input Operation
37-Pin D-Sub Connector
Compact Size - only half-size PCB

Driver til DOS og Windows

Supporterer 3.3V eller 5V PCI bus
12-bit A/D, sampling rate op til 110kS/s
16-CH single ended eller 8-CH differential inputs
On-board A/D FIFO
Bipolar eller unipolar analog input område
16-CH TTL DI og 16-CH TTL DO
2-CH 12-bit multiplying analog outputs

Isolationen beskytter både computer og  måleresultaterne mod fejl, grundet forskelle i stelpotentialer.

Supports a 32-bit 5 V PCI bus
12-bit A/D resolution
Up to 100 kS/s sampling rate
32-CH single-ended or 16-CH differential inputs
On-board 1 k-sample A/D FIFO
Bipolar or unipolar analog input ranges
Programmable gains of x1, x10, x100
Automatic analog inputs scanning

8-CH timers/counters
2-CH cascaded 32-bit timer with 1 MHz base clock
On-board multiple base clocks ranging from 100 kHz to 2 MHz
External gate control and clock inputs for each counter
Inverted gate signals for 4-CH synchronized frequency measurement
Multiple interrupt sources from counter outputs, timer outputs and external interrupt inputs

Adlink EXP-8A Data Logging & Acquisition 8 channel voltage to current converter expansion module

Support a 32-bit 3.3 V or 5 V PCI bus (LPCI-7200S)
32-CH TTL digital inputs and 32-CH TTL digital outputs
Up to 12 MB/s transfer rate
Bus mastering DMA for both digital inputs and outputs
On-board programmable timer pacer clock
Supports handshaking digital I/O transfer mode
Multiple programmable interrupt sources
Compact, low-profile PCI size PCB

Supports a 32-bit 5V PCI Express bus
Multiple I/O port configurations: 16-CH DI & 16-CH DO, 32-CH DI or 32-CH DO
Data transfer rate up to 160/80Mbytes/s
Bus-mastering DMA with scatter-gather technology
On-board internal timer pacer for clocked DIO
On-board 32k words FIFO
ACK and REQ signals for handshaking data transfer
Not recommended to be used in the system with greater than 4GB memory

32 D/I og 32 D/O, X1 PCI Express Interface
Maximum 50 MHz clock rate from internal timer or 100 MHz from external clock
200 MB/s maximum throughout
Software selectable voltage level of 1.8 V, 2.5 V, and 3.3 V
Per group (8-bit) input/output direction selectable
Support I ² C and SPI programmable serial interfaces for external device communication
Support Vsync & Hsync trigger for parallel digital image capture
8-channel auxiliary programmable I/O

Universal PCI interface til +5 V and +3.3 V PCI bus.
Op til 24 digitale I/O kanaler
Programmerbare I/O porte 
DIO response time 0.77 μs (1.3 MHz max.)
WIN Vista,98/NT/2000 and XP/2003 32-bit version OS

Supports a 32-bit 5 V PCI bus
24/48/96-CH digital TTL/DTL inputs/outputs
Emulates 4/2/1 industry standard 8255 PPI (mode 0)
Support Windows 7/8 X64/X86 and Windows 2008 R2
Output port status read back
On board 8254 timer/counter chip
Programmable interrupt source
12V and 5V power supply to OPTO-22 (Direct interface with OPTO-22)

Supports a 32-bit 5 V PCI Express bus
24/48/96-CH digital TTL/DTL inputs/outputs
Emulates 2 industry standard 8255 PPI (mode 0)
Support Windows 7/8 X64/X86 and Windows 2008 R2
Output port status read back
On board 8254 timer/counter chip
Programmable interrupt source
12V and 5V power supply to OPTO-22 (Direct interface with OPTO-22)

PCI Express kort med 96 TTL I/O kanaler, samt 3 tæller

X1 PCI Express interface
96-CH digital TTL/DTL inputs/outputs
Emulates 4/2/1 industry standard 8255 PPI (mode 0)
Direct interface with OPTO-22 compatible I/O modules
Output port status read back
On board 8254 timer/counter chip
Programmable interrupt source
Support Windows 7/8 X64/X86 and Windows 2008 R2

Moxa NP21103

DB25(M) Termininal Block Kit for RS-422/485

Axiom AX5488

IEEE-488 (GP-IB) interface card (IEEE-488.1)
NEC-chip PD7210
21 firmware commands
over 300kByte/s
DMA 1-3
IRQ2-7
with Basic, C, Pascal
Windows driver

16 optoisolerede indgange, fælles stel (minus) og 16 optoisolerede udgange,

Supports a 32-bit 5 V PCI Express bus - LOW PROFILE CARD
16-CH isolated digital inputs
16-CH isolated digital outputs - Open-Collector
5000 VRMS optical isolation
Sink current up to 500 mA on each isolated output

6-CH 32-bit industrial counter for three kinds of differential pulse trains, including A/B phase, CW/CCW, and Pulse/Direction
6-CH differential pulse generators up to 500 kHz
6-CH 32-bit position compare with interrupt function
6-CH 16-bit ±10 V analog output
6-CH 12-bit 133 kHz analog single-ended input
19-CH opto-isolated DI, 7-CH open collector DO
2500 VRMS isolated

Adlink ACL-105100 Computer Cables 100 PIN SCSI-II RS232 serial  CONNECTOR 

Terminalkort med DB37 polet han stik